https:///weradocs/Change_Log.shtml Last update:

WERA HF Radar Software - Fortran Programs Change Log

Program Date Revision Description
Plott_WERA_Cross_Cal_lsq 10-Dec-2009 V1.2.1
  1. V1.2.1 correct handling of VHF chirp lengths (sweepReduction)
  2. V1.2.0 include params.cfg:antpos_xxxxx.asc in phase calculations
Plott_WERA_Cal_lsq 10-Dec-2009 V1.2.5
  1. V1.2.5 correct handling of VHF chirp lengths (sweepReduction)
  2. V1.2.4 fix for large values of f_width, S/N from ordered statistics
wera16_beam 25-Nov-2009 V2.0.0
  1. V2.0.0 implement NSER_AVG, NTSU_AVG, NCUR_AVG, NTSU_STEP, NCUR_STEP
  2. V1.7.0 implement ADJ_RAN_nnn, ADJ_ANG_nnn
wera16_grid_ol
 19-Nov-2009 V1.2.2
  1. V1.2.2 modify handling of default value for NCUR_AVG in read_cfg
  2. V1.2.1 change interface to Find_rfi_nbeam
  3. V1.2.0 Bug fix for processing without RFI info
  4. V1.2.0 pass optional 2nd parameter to modify control filenames
wrad2uv
 16-Nov-2009 V2.0.4
  1. V2.0.4 pass WRADnamXX.dat by params.cfg [WRADNAM_nnn = 'xxx_WRADnam.dat']
  2. V2.0.3 add seconds to .win_asc filename if compiled with Use_Seconds = .true.
rad2uv
 16-Nov-2009 V2.0.3
  1. V2.0.3 pass RanamXX.dat by params.cfg [RANAM_nnn = 'xxx_Ranam.dat']
wera16_grid_rfi
 13-Nov-2009 V3.2.0
  1. V3.2.0 implement ADJ_RAN_nnn, ADJ_ANG_nnn
  2. V3.1.2 correct SPEC2 handling in Read_Header.F
  3. V3.1.1 modify interface to Find_rfi_nbeam
wera16_grid
 13-Nov-2009 V2.2.0
  1. V2.2.0 implement ADJ_RAN_nnn, ADJ_ANG_nnn
Plott_WERA_Sort_RCs_Beam_rfi 04-Sep-2009 V2.2.6
  1. V2.2.6 change interface to Find_rfi_nbeam
Plott_WERA16_Grid
 03-Sep-2009 V3.0.2
  1. V3.0.2 print CIT on figure
  2. V3.0.2 write spectrum to file (ASCII), if write_ASCII = .true.
  3. V3.0.1 correct reading FREQ from header (get all digits)
Plott_UV
 13-Jul-2009 V1.8.4
  1. V1.8.4 if costline file not found, print error and exit
Plott_WERA_USort_RCs_Beam_rfi 02-Jul-2009 V1.2.2
  1. V1.2.2 correct check of header codes, pass only 'FMUNSO' or 'FMUNSN'
  2. V1.2.1 if .RFI file is not there, don't do any RFI processing
Plott_WERA_USort_RCs_Beam 02-Jul-2009 V1.1.3
  1. V1.1.3 correct check of header codes, pass only 'FMUNSO' or 'FMUNSN'
Plott_WERA_USort_RCs 02-Jul-2009 V1.0.4
  1. V1.0.4 correct check of header codes, pass only 'FMUNSO' or 'FMUNSN'
Modify_WERA_SORT
 15-Jun-2009 V1.1.0
  1. V1.1.0 modify .RFI file if it exists
  2. V1.1.0 implement subroutine Correct_ChirpStart
Plott_UV
 11-Jun-2009 V1.8.3
  1. V1.8.3 again: Select_Coast.F: correct point on frame problem
wera16_grid_ol
 06-Jun-2009 V1.1.0
  1. V1.1.0 make rfi_nam from sort_nam by subroutine Make_rfi_nam in combine_usort
  2. V1.1.0 implement Correct_ChirpStart
wera16_grid_rfi
 06-Jun-2009 V3.1.0
  1. V3.1.0 make rfi_nam from sort_nam by subroutine Make_rfi_nam
  2. V3.1.0 implement Correct_ChirpStart
Plott_WERA_Sort_RCs_Beam_rfi 06-Jun-2009 V2.2.5
  1. V2.2.5 make rfi_nam from sort_nam by subroutine Make_rfi_nam
Plott_WERA_Sort_RCs_Beam 05-Jun-2009 V1.5.3
  1. V1.5.3 define logical "subtract_DC", default is now .false.
wera16_grid
 04-Jun-2009 V2.1.0
  1. V2.1.0 implement Correct_ChirpStart
Plott_WERA_USort_RCs_Beam_rfi 04-Jun-2009 V1.2.0
  1. V1.2.0 inplement 'wera16_grid_rfi V1.1.2' algorithm for RFI rejection
Plott_WERA_USort_RCs 04-Jun-2009 V1.0.3
  1. V1.0.3 allow FMUNSN header code, correct Openvms problem with cfg_nam
wrad2uv
 28-May-2009 V2.0.2
  1. V2.0.2 give coherent integration time (CIT) info
Plott_UV
 26-May-2009 V1.8.2
  1. V1.8.2 print integration times (2-dim currents) if given in .crad file
  2. V1.8.2 read model name and pass to Model_Name(7:L_Model_Name)
rad2uv
 26-May-2009 V2.0.2
  1. V2.0.2 give coherent integration time (CIT) info
List_Radial
 15-May-2009 V1.0.1
  1. V1.0.1 give coherent integration time (CIT) info
wera16_grid_ol
 04-May-2009 V1.0.5
  1. V1.0.5 use REPROC instead of IST to point to calibration file in Read_USORT
Plott_WERA_USort_RCs 04-May-2009 V1.0.2
  1. V1.0.2 use REPROC instead of IST to point to calibration file in Read_USORT
Plott_WERA_USort_RCs_Beam 04-May-2009 V1.1.2
  1. V1.1.2 use REPROC instead of IST to point to calibration file in Read_USORT
Plott_WERA_USort_RCs_Beam_rfi 04-May-2009 V1.1.2
  1. V1.1.2 use REPROC instead of IST to point to calibration file in Read_USORT
Plott_UV
 05-Mar-2009 V1.8.1
  1. V1.8.1 OpenVMS: correct option "-o"
  2. V1.8.1 print integration times
wera16_grid_ol
 05-Mar-2009 V1.0.4
  1. V1.0.4 inplement TSU_SPEC
  2. V1.0.3 inplement 'wera16_grid_rfi V1.1.2' algorithm for RFI
  3. V1.0.3 pass logical*4 is_URFI to Read_USORT (in Combine_USORT)
Plott_WERA_USort_RCs 26-Feb-2009 V1.0.1
  1. V1.0.1 pass logical*4 is_URFI to Read_USORT
Plott_WERA_USort_RCs_Beam 26-Feb-2009 V1.1.1
  1. V1.1.1 pass logical*4 is_URFI to Read_USORT
Plott_WERA_USort_RCs_Beam_rfi 26-Feb-2009 V1.1.1
  1. V1.1.1 pass logical*4 is_URFI to Read_USORT
Plott_WERA_Cross_Cal_lsq 19-Feb-2009 V1.1.3
  1. V1.1.3 Provide noise level by Hildebrand criterion
wera16_grid_ol
 06-Feb-2009 V1.0.2
  1. V1.0.2 bugfix for NTL
  2. V1.0.1 restart coherence when frequency changes
wera16_spec_cwrad 06-Feb-2009 V3.0.1
  1. V3.0.1 do not print DDS_Clock. Info is not available in SPEC file
wera16_spec_cwrad_rfi 06-Feb-2009 V3.0.1
  1. V3.0.1 do not print DDS_Clock. Info is not available in SPEC file
Plott_UV
 04-Feb-2009 V1.8.0
  1. V1.8.0 Select_Coast.F: correct first and last point on frame problem
  2. V1.8.0 implement GDOP coloured background
  3. V1.8.0 GRID_RAD: Bugfix for LON scaling when showing radial currents (-d=4)
  4. V1.8.0 Color_Scale, km_nm_Scale, slightly reduce font size at 'large_font'
  5. V1.8.0 GRID_RAD: Include seconds in time string
  6. V1.8.0 GRID_RAD: Implement +/- colours for radial currents
Plott_WERA_FullCal 06-Jan-2008 V1.0.2
  1. V1.0.2 select antenna number or all antennas
  2. V1.0.2 OpenVMS: Bugfix for PARSE_FILNAM
WERA_FullCal_lsq 06-Jan-2009 V1.0.3
  1. V1.0.3 OpenVMS: Fix error message for missing filenames
  2. V1.0.3 Issue warning, if no signal found
  3. V1.0.3 OpenVMS: Bugfix for PARSE_FILNAM
wrad2uv
 05-Dec-2008 V2.0.1
  1. V2.0.1 generalize regression parameters below 0.09 Hz in SET_GA
Plott_WERA_Sort_RCs_Beam_rfi 28-Nov-2008 V2.2.4
  1. V2.2.4 bugfix for NSER .lt. 512
Plott_WERA16_SORT
 28-Nov-2008 V1.4.2
  1. V1.4.2 bugfix for NSER .lt. 512
wera16_beam 28-Nov-2008 V1.6.1
  1. V1.6.1 bugfix for NSER .lt. 512
wera16_grid
 28-Nov-2008 V2.0.2
  1. V2.0.2 bugfix for NSER .lt. 512
wera16_grid_rfi
 28-Nov-2008 V3.0.1
  1. V3.0.1 bugfix for NSER .lt. 512
wera4_dir
 28-Nov-2008 V1.3.4
  1. V1.3.4 bugfix for NSER .lt. 512
Plott_WERA_Sort_Ang_Beam
 06-Nov-2008 V1.3.2
  1. V1.3.2 implement "GKS_Update_Workstation" and "PEEKCHARQQ()"
  2. V1.3.2 read AUTO_SCALE from params.cfg
  3. V1.3.2 Bugfix for plotting more than 4096 samples
  4. V1.3.2 enable GLI_GKS_DOUBLE_BUF
Plott_WERA_Sort_RCs_Beam 06-Nov-2008 V1.5.2
  1. V1.5.2 implement "GKS_Update_Workstation" and "PEEKCHARQQ()"
  2. V1.5.2 read AUTO_SCALE from params.cfg
  3. V1.5.2 enable GLI_GKS_DOUBLE_BUF
Plott_WERA_Sort_RCs_Beam_rfi 06-Nov-2008 V2.2.3
  1. V2.2.3 implement "GKS_Update_Workstation" and "PEEKCHARQQ()"
  2. V2.2.3 read AUTO_SCALE from params.cfg
  3. V2.2.3 enable GLI_GKS_DOUBLE_BUF
  4. V2.2.2 set 'debug_rfi = .false.' before calling find_rfi_nbeam
Plott_WERA_Sort_RCs
Plott_WERA_Sort_RCs_Gain		 06-Nov-2008 V1.3.16
  1. V1.3.16 implement "GKS_Update_Workstation" and "PEEKCHARQQ()"
  2. V1.3.16 Bugfix for plotting more than 4096 samples
  3. V1.3.16 enable GLI_GKS_DOUBLE_BUF
Plott_UV
 06-Nov-2008 V1.7.3
  1. V1.7.3 implement "GKS_Update_Workstation" and "PEEKCHARQQ()"
  2. V1.7.3 enable GLI_GKS_DOUBLE_BUF
  3. V1.7.2 limit comparison of site name to 11 characters in 'Plott_Area.F'
Plott_WERA16_Grid
 06-Nov-2008 V3.0.0
  1. V3.0.0 implement "GKS_Update_Workstation" and "PEEKCHARQQ()"
  2. V3.0.0 enable GLI_GKS_DOUBLE_BUF
  3. V3.0.0 new compressed .SPEC file format implemended (SPEC2)
Plott_WERA16_SORT
 06-Nov-2008 V1.4.1
  1. V1.4.1 implement "GKS_Update_Workstation" and "PEEKCHARQQ()"
  2. V1.4.1 enable GLI_GKS_DOUBLE_BUF
Plott_WERA_Cal_lsq 06-Nov-2008 V1.2.3
  1. V1.2.3 implement "GKS_Update_Workstation" and "PEEKCHARQQ()"
  2. V1.2.3 enable GLI_GKS_DOUBLE_BUF
  3. V1.2.2 use CLOCK_90 info from mode bits
Plott_WERA_Cross_Cal_lsq 06-Nov-2008 V1.1.2
  1. V1.1.2 implement "GKS_Update_Workstation" and "PEEKCHARQQ()"
  2. V1.1.2 enable GLI_GKS_DOUBLE_BUF
  3. V1.1.1 use CLOCK_90 info from mode bits
  4. V1.1.0 implement steering angle to transmitted signal
Plott_WERA_FullCal 06-Nov-2008 V1.0.1
  1. V1.0.1 implement "GKS_Update_Workstation" and "PEEKCHARQQ()"
  2. V1.0.1 enable GLI_GKS_DOUBLE_BUF
wera16_grid_rfi
 22-Aug-2008 V3.0.0
  1. V3.0.0 implement compressed .SPEC data format (SPEC2)
  2. V3.0.0 select non-RFI version by RFI_ENA = .FALSE. in params*.cfg
wera16_spec_cwrad 21-Aug-2008 V3.0.0
  1. V3.0.0 new compressed .SPEC file format implemended (SPEC2)
wera16_spec_cwrad_rfi 21-Aug-2008 V3.0.0
  1. V3.0.0 new compressed .SPEC file format implemended (SPEC2)
WERA_FullCal_lsq 08-Jul-2008 V1.0.2
  1. V1.0.2 use CLOCK_90 info from mode bits
Plott_WERA_Cal_lsq 01-Jul-2008 V1.2.1
  1. V1.2.1 if .gif requested: generate .ps figure and convert to .gif
    requires GhostScript and netpbm packages
wera4_dir
 01-Jul-2008 V1.3.3
  1. V1.3.3 OpenVMS: read .cfg file from [gurgel.etc]
rad2uv
 01-Jul-2008 V2.0.1
  1. V2.0.1 bug fix for write_gdop
Plott_WERA_Sort_RCs
Plott_WERA_Sort_RCs_Gain		 12-Jun-2008 V1.3.15
  1. V1.3.15 set FSCALE=155 for Plott_WERA_Sort_RCs (not _Gain version)
wera16_grid
 09-May-2008 V2.0.1
  1. V2.0.1 use subroutine 'normalise' instead of own code
Plott_WERA_Cross_Cal_lsq 09-May-2008 V1.0.2
  1. V1.0.2 fix problem with windowing function for spectra
  2. V1.0.2 OpenVMS: fix routine 'PARSE_FILNAM'
Plott_UV
 23-Apr-2008 V1.7.1
  1. V1.7.1 set pnmcut values according to GKS viewport
  2. V1.7.1 Plott_GPS: reduce number of "boxes" plotted.
Plott_WERA_Sort_Ang_Beam
 16-Apr-2008 V1.3.1
  1. V1.3.1 implement auto_scale
  2. V1.3.1 Fix for plotting more than 4096 samples
Plott_WERA_Sort_RCs
Plott_WERA_Sort_RCs_Gain		 17-Feb-2008 V1.3.14
  1. V1.3.14 Fix for plotting more than 4096 samples
Plott_WERA_Sort_RCs_Beam 17-Feb-2008 V1.5.1
  1. V1.5.1 Fix for plotting more than 4096 samples
Plott_WERA_Sort_RCs_Beam_rfi 17-Feb-2008 V2.2.1
  1. V2.2.1 Fix for plotting more than 4096 samples
wera16_spec_cwrad 28-Jan-2008 V2.0.1
  1. V2.0.1 'Read_topo' implemented
  2. V2.0.1 give "*** MAX_RAD_CUR too large, reset to..." message only once
wrad2uv
 12-Dec-2007 V2.0.0
  1. V2.0.0 release version for WGS84 calculations
  2. V1.0.7 OpenVMS: read Param_UV_xxx.cfg from $user1:[Gurgel.etc]
rad2uv
 10-Dec-2007 V2.0.0
  1. V2.0.0 release version for WGS84 calculations
  2. V1.1.0 RC 1 is at distance 0 km
  3. quantify RAN_OFF to multiples of 50m
  4. V1.0.6 OpenVMS: read Param_UV_xxx.cfg from $user1:[Gurgel.etc]
Plott_WERA16_Grid
 10-Dec-2007 V1.2.2
  1. quantify RAN_OFF to multiples of 50m
List_Radial_NOAA
 05-Dec-2007 V1.0.0
  1. Initial version derived from List_Radial.F
Plott_UV
 04-Dec-2007 V1.7.0
  1. V1.7.0 implement NOAA .ruv format inside -d=4
  2. V1.6.0 RC 1 is at distance 0 km
wera16_grid
 30-Nov-2007 V2.0.0
  1. V2.0.0 release version for WGS84 calculations
  2. V1.7.0 RC 1 is at distance 0 km
  3. V1.7.0 implement WGS84 calculations
  4. V1.6.4 Modify speed of light from 300.0 to 299.792458 (150.0 to 149.896229)
wera16_grid_rfi
 30-Nov-2007 V2.0.0
  1. V2.0.0 release version for WGS84 calculations
  2. V1.4.0 RC 1 is at distance 0 km
  3. V1.4.0 implement WGS84 calculations
  4. V1.3.4 Modify speed of light from 300.0 to 299.792458 (150.0 to 149.896229)
wera16_spec_cwrad 29-Nov-2007 V2.0.0
  1. V2.0.0 implement writing NOAA .ruv file, if NOAA_File = .true.
  2. V1.0.10 RC 1 is at distance 0 km
  3. V1.0.10 Modify speed of light from 300.0 to 299.792458 (150.0 to 149.896229)
  4. OpenVMS: read .cfg file from [gurgel.etc]
wera16_spec_cwrad_rfi 29-Nov-2007 V2.0.0
  1. V2.0.0 implement writing NOAA .ruv file, if NOAA_File = .true.
  2. V1.1.4 RC 1 is at distance 0 km (no modification necessary)
  3. V1.1.4 Modify speed of light from 300.0 to 299.792458 (150.0 to 149.896229)
  4. V1.1.3 OpenVMS: read Param_UV_xxx.cfg from $user1:[Gurgel.etc]
Plott_WERA_Cal_lsq 27-Nov-2007 V1.2.0
  1. V1.2.0 implement ZOOM
wera16_beam 16-Nov-2007 V1.6.0
  1. V1.6.0 OpenVMS: read .cfg file from [gurgel.etc]
  2. V1.6.0 RC 1 is at distance 0 km
  3. V1.6.0 implement WGS84 calculations
  4. V1.5.3 Modify speed of light from 300.0 to 299.792458 (150.0 to 149.896229)
Plott_WERA_Sort_RCs 13-Nov-2007 V1.3.13
  1. V1.3.13 RC 1 is at distance 0 km
  2. V1.3.12 Add test code for giving the frequency of spec-lines
  3. V1.3.11 Linux: modify figure names: _SORT* to .SORT*
Plott_WERA_Sort_RCs_Beam
 13-Nov-2007 V1.5.0
  1. V1.5.0 RC 1 is at distance 0 km
  2. V1.5.0 implement WGS84 calculations
  3. Modify speed of light from 300.0 to 299.792458 (150.0 to 149.896229)
Plott_WERA_Sort_RCs_Beam_rfi
 13-Nov-2007 V2.2.0
  1. V2.2.0 RC 1 is at distance 0 km
  2. V2.2.0 implement WGS84 calculations
  3. Modify speed of light from 300.0 to 299.792458 (150.0 to 149.896229)
Plott_WERA_Sort_Ang_Beam
 13-Nov-2007 V1.3.0
  1. V1.3.0 RC 1 is at distance 0 km
  2. V1.3.0 implement WGS84 calculations
  3. Modify speed of light from 300.0 to 299.792458 (150.0 to 149.896229)
Plott_WERA16_SORT
 13-Nov-2007 V1.4.0
  1. V1.4.0 RC 1 is at distance 0 km
  2. V1.4.0 implement WGS84 calculations
  3. V1.3.4 Modify speed of light from 300.0 to 299.792458 (150.0 to 149.896229)
wera16_grid
wera16_grid_rfi
Plott_WERA16_SORT
Plott_WERA_Sort_Ang_Beam
Plott_WERA_Sort_RCs_Beam
Plott_WERA_Sort_RCs_Beam_rfi
wera16_beam 		19-Oct-2007 V1.6.3
V1.3.3
V1.3.3
V1.2.3
V1.4.4
V2.1.6
V1.5.2
  1. Linux: overwrite exising AntPos_nnn file "type = 'replace'" in subroutine Read_Array_Spacing.F
wera16_grid_rfi 17-Sep-2007 V1.3.2
  1. Correct pointer to site coordinates for site numbers >1 : Site coordinates are always passed by LAT_ST(1), LON_ST(1) in subroutine Read_Array_Spacing.F
wera16_grid 17-Sep-2007 V1.6.2
  1. Correct pointer to site coordinates for site numbers >1 : Site coordinates are always passed by LAT_ST(1), LON_ST(1) in subroutine Read_Array_Spacing.F
wera16_beam 17-Sep-2007 V1.5.1
  1. Correct pointer to site coordinates for site numbers >1 : Site coordinates are always passed by LAT_ST(1), LON_ST(1) in subroutine Read_Array_Spacing.F
Plott_WERA_Sort_RCs_Beam_rfi 17-Sep-2007 V2.1.5
  1. V2.1.5 Correct pointer to site coordinates for site numbers >1 : Site coordinates are always passed by LAT_ST(1), LON_ST(1) in subroutine Read_Array_Spacing.F
  2. V2.1.4 Modify values replaced by RFI
  3. V2.1.3 New method to "subtract" RFI
  4. V2.1.2 OpenVMS: read .cfg file from [gurgel.etc]
  5. V2.1.1 Option 'large_font' to increase the font size
  6. V2.1.1 Implement auto_scale
Plott_WERA_Sort_RCs_Beam 17-Sep-2007 V1.4.3
  1. Correct pointer to site coordinates for site numbers >1 : Site coordinates are always passed by LAT_ST(1), LON_ST(1) in subroutine Read_Array_Spacing.F
Plott_WERA_Sort_Ang_Beam 17-Sep-2007 V1.2.2
  1. Correct pointer to site coordinates for site numbers >1 : Site coordinates are always passed by LAT_ST(1), LON_ST(1) in subroutine Read_Array_Spacing.F
Plott_WERA16_SORT 17-Sep-2007 V1.3.2
  1. Correct pointer to site coordinates for site numbers >1 : Site coordinates are always passed by LAT_ST(1), LON_ST(1) in subroutine Read_Array_Spacing.F
Plott_UV 17-Sep-2007 V1.5.6
  1. V1.5.6 correct plotting wave direction for large grids.
  2. V1.5.5 change 'Uni-Hamburg WERA' tp 'WERA'
  3. V1.5.4 OpenVMS: read Param_UV_xxx.cfg from $user1:[Gurgel.etc]
  4. V1.5.3 Linux: modify figure names: _crad* to .crad* etc...
  5. V1.5.2 OpenVMS: remove version number when making fig_nam
Plott_WERA_Cal_lsq 16-Aug-2007 V1.1.6
  1. Print spectrum in ASCII if required (logical spec2file)
wera16_grid_rfi 25-Feb-2007 V1.3.0
  1. Read Win_Array_Type from params.cfg
  2. Implement antenna locations [LAT,LON] for beam forming
  3. Implement "has_RFI"
wera16_grid 25-Feb-2007 V1.6.0
  1. Read Win_Array_Type from params.cfg
  2. Implement antenna locations [LAT,LON] for beam forming
wera16_beam 25-Feb-2007 V1.5.0
  1. Read Win_Array_Type from params.cfg
  2. Implement antenna locations [LAT,LON] for beam forming
Plott_UV 05-Feb-2007 V1.5.1
  1. Set ghostscript Papersize to "a4"
  2. Pass name of output figure by -o=figure_name.ext
Plott_WERA_Sort_RCs_Beam_rfi 25-Feb-2007 V2.1.0
  1. Read Win_Array_Type from params.cfg
  2. Implement antenna locations [LAT,LON] for beam forming
  3. Set ghostscript Papersize to "a4"
Plott_WERA_Sort_RCs_Beam 25-Feb-2007 V1.4.0
  1. Read Win_Array_Type from params.cfg
  2. Implement antenna locations [LAT,LON] for beam forming
  3. set ghostscript Papersize to "a4"
  4. Linux: fix handling of .ps filename
Plott_WERA_Sort_RCs_Gain 05-Feb-2007 V1.3.10
  1. Set ghostscript Papersize to "a4"
Plott_WERA_Sort_RCs 05-Feb-2007 V1.3.10
  1. Set ghostscript Papersize to "a4"
Plott_WERA_Sort_Ang_Beam 25-Feb-2007 V1.2.0
  1. Read Win_Array_Type from params.cfg
  2. Implement antenna locations [LAT,LON] for beam forming
  3. Set ghostscript Papersize to "a4"
Plott_WERA16_SORT 25-Feb-2007 V1.3.0
  1. Read Win_Array_Type from params.cfg
  2. implement antenna locations [LAT,LON] for beam forming
  3. set ghostscript Papersize to "a4"
Plott_WERA16_Grid 05-Feb-2007 V1.2.1
  1. Set ghostscript Papersize to "a4"
Plott_UV 25-Jan-2007 V1.4.0
  1. Implement plotting of .crad POWER, NOISE, S2N
Plott_WERA_Sort_RCs_Beam_rfi 22-Jan-2007 V2.0.1
  1. Linux: fix handling of .ps filename
Plott_WERA_Sort_RCs_Beam 22-Jan-2007 V1.3.8
  1. Linux: fix handling of .ps filename
Plott_WERA_Sort_RCs_Gain 22-Jan-2007 V1.3.9
  1. Linux: fix handling of .ps filename
Plott_WERA_Sort_RCs 22-Jan-2007 V1.3.9
  1. Linux: fix handling of .ps filename
Plott_WERA_Sort_Ang_Beam 22-Jan-2007 V1.1.6
  1. Linux: fix handling of .ps filename
Plott_WERA16_SORT 22-Jan-2007 V1.2.2
  1. Linux: fix handling of .ps filename
Plott_WERA16_Grid 22-Jan-2007 V1.2.0
  1. Linux: fix handling of .ps filename
  2. if .gif requested: generate .ps figure and convert to .gif
    requires GhostScript and netpbm packages
Plott_UV 22-Jan-2007 V1.3.8
  1. If 'gif' generate .ps figure and convert to .gif
  2. option 'large_font' to increase the font size
Plott_UV 07-Dec-2006 V1.3.7
  1. Re-arrange large scales for LAT and km_nm_scale
wera16_spec_cwrad 30-Oct-2006 V1.0.8
  1. Correct HEADER/extended_HEADER to HEAD conversion
wera16_spec_cwrad_rfi 10-Oct-2006 V1.1.2
  1. Correct HEADER/extended_HEADER to HEAD conversion
  2. use 'TOPO' and 'TOPO_NAME' from params.cfg:
    TOPO to enable topography processing
    TOPO_NAME to pass the name of the topography file
Plott_WERA16_SORT 09-Oct-2006 V1.2.1
  1. Write spectrum to file (ASCII)
  2. Mark 2nd order bands
  3. If .gif requested: generate .ps figure and convert to .gif
    requires GhostScript and netpbm packages
Plott_WERA_Sort_RCs_Beam_rfi 02-Oct-2006 V1.2.1
  1. "Subtract" RFI spectrum
  2. Generate .ps figure and convert to .gif
  3. 2nd parameter is configuration file (params.cfg)
Plott_UV 02-Oct-2006 V1.3.6
  1. Add 'ILEFT' and 'LLEFT' to params.cfg:
    ILEFT to plot the instrument's name left of the instrument's location
    LLEFT to plot the location name left of the location
  2. Plot instruments and locations @ d=0
Plott_WERA_Sort_RCs_Beam 27-Sep-2006 V1.3.6
  1. OpenVMS: if .gif requested: generate .ps figure and convert to .gif
    requires GhostScript and netpbm packages
Plott_WERA_Sort_RCs 27-Sep-2006 V1.3.8
  1. OpenVMS: if .gif requested: generate .ps figure and convert to .gif
    requires GhostScript and netpbm packages
Plott_WERA_Sort_RCs_Gain 27-Sep-2006 V1.3.8
  1. OpenVMS: if .gif requested: generate .ps figure and convert to .gif
    requires GhostScript and netpbm packages <.ol>
Plott_WERA_Sort_Ang_Beam 27-Sep-2006 V1.1.5
  1. OpenVMS: if .gif requested: generate .ps figure and convert to .gif
    requires GhostScript and netpbm packages
Plott_WERA_Sort_Ang_Beam 12-Jul-2006 V1.1.4
  1. Linux: if .gif requested: generate .ps figure and convert to .gif
    requires GhostScript and netpbm packages
Plott_WERA_Sort_RCs_Beam 12-Jul-2006 V1.3.5
  1. Linux: if .gif requested: generate .ps figure and convert to .gif
    requires GhostScript and netpbm packages
wera16_grid_rfi 28-Jun-2006 V1.1.3
  1. Correct normalization of spectra
Plott_UV 30-May-2006 V1.3.5
  1. Add 'LIMIT_SKU' and 'KNOTS' to params.cfg:
    LIMIT_SKU to limit arrow length to 0.4 m/s
    KNOTS to to switch knots | m/s
Plott_WERA16_grid 24-May-2006 V1.1.8
  1. Implement a fixed reference level if 'fixed_ref = .true.'
    needs to be recompiled after changing 'fixed_ref' to .true.
    default is 'fixed_ref = .false.' (previous behaviour)
Plott_WERA_Sort_RCs 21-Apr-2006 V1.3.7
  1. Linux: if .gif requested: generate .ps figure and convert to .gif
    requires GhostScript and netpbm packages
Plott_WERA_Sort_RCs_Gain 21-Apr-2006 V1.3.7
  1. Linux: if .gif requested: generate .ps figure and convert to .gif
    requires GhostScript and netpbm packages
Plott_WERA16_SORT 10-Apr-2006 V1.1.9
  1. Fix bug in VMS code (cfg_nam)
Plott_WERA_Sort_Ang_Beam 10-Apr-2006 V1.1.3
  1. Fix bug in VMS code (cfg_nam)
Plott_WERA_Sort_RCs 10-Apr-2006 V1.3.6
  1. Fix bug in VMS code (cfg_nam)
Plott_WERA_Sort_RCs_Gain 10-Apr-2006 V1.3.6
  1. Fix bug in VMS code (cfg_nam)
Plott_WERA_Sort_RCs_Beam 10-Apr-2006 V1.3.4
  1. Fix bug in VMS code (cfg_nam)
  2. Implement auto_scale
Plott_WERA16_grid 20-Feb-2006 V1.1.7
  1. Remove unnecessay call to 'read_cfg'
Plott_WERA16_SORT 20-Feb-2006 V1.1.8
  1. Read 3rd optional parameter for configuration file
Plott_WERA_Sort_Ang_Beam 17-Feb-2006 V1.1.2
  1. Read 3rd optional parameter for configuration file
Plott_WERA_Sort_RCs_Beam 17-Feb-2006 V1.3.3
  1. Read 3rd optional parameter for configuration file
Plott_WERA_Sort_RCs 15-Feb-2006 V1.3.5
  1. Look for antenna number of strongest signal
Plott_WERA_Sort_RCs_Gain 15-Feb-2006 V1.3.5
  1. Look for antenna number of strongest signal
wera16_spec_cwrad 28-Nov-2005 V1.0.6
  1. Correct problem with NANT for selection of 'NEW_FORMAT_4'
Comments to: gurgel@ifm.uni-hamburg.de (Klaus-Werner Gurgel)