https:///weradocs/live_in_etc.shtml Last update:

WERA HF Radar Software - Files in /home/wera/etc

Note that for the Linux version /home/wera/etc/params.cfg is the new location where params.cfg should live. Also check carefully which entries in params.cfg should now go to /home/wera/etc .

For an initial installation of the science package, the following files should be downloaded from here and saved to /home/wera/etc:

  1. PHAS_THEO_360_180deg.asc
  2. params.cfg (edit the template)
  3. wera_gain.asc (rename to wera_gain.dat)
The following files should be located in /home/wera/etc . This list is to be extended when other software components have been ported to the new structure. 
 1. -rw-r--r--    1 wera     users      616042 Aug 15 17:34 Oahu_grid_100_140.asc
 2. -rw-r--r--    1 wera     users      672015 Aug 15 17:34 Oahu_watt_100_140.asc
 3. -rw-r-----    1 wera     users       13325 Jul 10 16:51 PHAS_THEO_360_180deg.asc
 4. -rw-r--r--    1 wera     users          45 Nov 14 13:28 Ranam1.dat
 5. -rw-r--r--    1 wera     users          45 Nov 14 13:29 Ranam2.dat
 6. -rw-r--r--    1 wera     users         457 Nov 12 13:30 WeraDesk.tmp
 7. -rw-r-----    1 wera     users        8289 Nov 14 14:46 params.cfg
 8. -rw-r-----    1 wera     users        2051 Nov  5  2001 wera_gain.dat
 9. -rw-r-----    1 wera     users         514 Mar 23 19:23 antpos_koolina.asc
10. -rw-r--r--    1 wera     users         163 Nov 26 19:36 error_sms
11. -rw-r--r--    1 wera     users         610 Nov 26 19:36 wera16_grid_errors.asc
12. -rw-r--r--    1 wera     users         656 Dez 11 17:19 calibration.wera.apply
13. -rw-r--r--    1 wera     users         656 Dez 11 17:18 calibration.wera.remove
14. -rw-r--r--    1 wera     users         656 Dez 11 17:18 calibration.wera
15. -rwx--x--x    1 wera     users          56 Jan 07 11:55 process_CAL.sh
16. -rwx--x--x    1 wera     users          56 Jan 07 11:55 process_RAW.sh
17. -rwx--x--x    1 wera     users          57 Jan 07 11:55 process_SORT.sh
18  -rw-r--r--    1 wera     users      151578 Aug 14 10:46 koolina.fullcal
19  -rw-r--r--    1 wera     users      151578 Aug 14 10:46 kaena.fullcal
  1. Measurement grid file
  2. Measurement watt file to suppress grid points from processing
  3. Phase differences used for square-array direction finding. An example can be found here.
  4. File containing file name to be input to rad2uv.
  5. File containing file name to be input to rad2uv.
  6. Intermediate file used by the web-based WeraDesk. This file is dynamically updated by the cgi-script. An example can be found here (rename WeraDesk.asc to WeraDesk.tmp).
  7. Basic configuration file params.cfg
  8. The file containing the WERA 'gain ramp'. An example can be found here (rename wera_gain.asc to wera_gain.dat).
  9. Antenna locations of the linear array in Lat/Lon (supplied or calculated from direction and spacing.
  10. The text of a sms-message or email to be sent by wera16_grid if a bad antenna is found.
  11. All bad antenna error messages generated during runs of wera16_grid collected in one file for reference.
  12. Phase calibration data to be applied by Modify_WERA_SORT.
  13. Phase calibration data to be removed by Modify_WERA_SORT.
  14. Phase calibration data to be used by WERA during Acquisition.
  15. Script to be executed at the end of a .CAL measurement if requested by WeraDesk.
  16. Script to be executed at the end of a .RAW measurement if requested by WeraDesk.
  17. Script to be executed at the end of a .SORT measurement if requested by WeraDesk.
  18. Full Calibration data for the Koolina site (processed by WERA_FullCal_lsq.
  19. Full Calibration data for the Kaena site (processed by WERA_FullCal_lsq.
Comments to: gurgel@ifm.uni-hamburg.de (Klaus-Werner Gurgel)