| https:///weradocs/WeraDesk_Cal_Power.shtml |
This field can be used to reduce the direct path TX signal during 'Calibration' mode. When switching to Calibration (80 Hz offset), the receivers are probably overdriven if the normal transmit power is kept. This mode enables to add attenuation to the transmitted signal during calibration cycles; it does not have any effect on normal cycles and 'Internal Calibration'.
| The Calibration Power field has the following options: | |
| 000 | Set full calibration power |
| -01 | Reduce calibration power by 1 dB |
| -02 | Reduce calibration power by 2 dB |
| -nn | Reduce calibration power by nn dB |
| BACK |