WeraDesk Web Interface Documentation - Script Control

Parameter	Value	Comment
SUBJECT:	WeraDesk parameters	Do not modify this parameter
ACQMODE:	Continuous	Available values
PRO_SPC:	sort	If box checked, include this line and set value to "sort", if box not checked, remove this line
PRO_CAL:	cal	If box checked, include this line and set value to "cal", if box not checked, remove this line
PRO_RAW:	FM raw	If box checked, include this line and set value to "raw", if box not checked, remove this line
STATION:	Master	Available values, currently ignored
LOCSITE:	Hamburg	Enter site name (max 12 characters)
TRUE_NO:	344	Enter antenna orientation
TIM_COD:	UTC	Enter "UTC" or "LOC" (3 characters)
LAT_DEG:	54	Latitude degrees (2 characters)
LAT_MIN:	18.00	Latitude minutes (nn.nn)
LAT_SID:	N	Enter "N" or "S"
STA_TIM:	00	Enter Cont. Acqu. Start Time in minutes (2 characters)
LON_DEG:	Longitude degrees (2 characters)	Comment
LON_MIN:	7.00	Longitude minutes (nn.nn)
LON_SID:	W	Enter "E" or "W"
WRK_FRQ:	27.652	Enter Working Frequency nn.nnn in MHz
REP_TIM:	02	Enter Cycle Repetition Time in minutes (2 characters)
RAN_RES:	1500	Available values
NUM_RAN:	138	Enter Number of Range Cells 32 to 256 in steps of 1
SAMPLES:	1536	Enter Samples per Data Run 64 to 4096, any value your postprocessing can cope with
MAX_RAN:	207	Do not modify, this value is calculated
CHIRPLN:	0.270833	Available values
ACQ_MIN:	1	Do not modify, this value is calculated
ACQ_SEC:	09	Do not modify, this value is calculated
RAN_OFF:	0.5	Enter Range Offset n.n in range cells
RX_OFFS:	0	Enter RX Offset nnnnnnnnn (I9) in DDS steps
DATADIR:	kaena/	Enter Data Path max. 30 character, end with '/'
SITE_CO:	kna	Enter File Location ID 3 characters
COMMENT:	WERA Lab Tests at University of Hamburg. ...	Enter up to 80 characters of comment

BACK